A Mechanism of Pool Formation and Maintenance in Forest Streams
Laboratory and field investigations illustrate a hydraulic mechanism responsible for the formation and maintenance of pools associated with large, in-channel obstructions in forest streams....
Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...
Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...
Scour Hole Depth Downstream of the SAF stilling Basin
A Model to predict the maximum local scour depth downstream of the SAF stilling basin is presented. The model is based on stability analysis of a particle attacked by the hydrodynamic...
Evaluation of Six Methods for the LP3 Distribution
Six frequently used estimation methods for the Log-Pearson type 3 distribution were evaluated using both the predictive and the descriptive performance indices. Ten LP3 populations and...
Discharge-Frequency Relationships in Distributary Flow Systems
The paper describes discharge-frequency relationships in distributary flow systems. The stream network that makes up the flow system is described in terms of how the various stream segments...
Temporal and Spatial Variations of Suspended Sediment Concentration during Navigation Traffic in a Natural River
Suspended sediment samples were collected within the channel border area during barge-tow passage events at three cross-sectional locations on the Upper Mississippi River. Typical plots...
Urban Runoff Based on Land Use and Particle Size
As point sources have achieved pollution compliance, the focus of pollution abatement has shifted to nonpoint sources. New Federal regulations require wet-weather monitoring of drainage...
Theoretical study of unstable waves in the rapids of the river
This paper examines how the velocity distribution in free-surface flow affects the kinematic and dynamic velocities of disturbance waves on hillslopes or in high-gradient rivers, thereby...
Numerical Modelling and Laboratory Verification for the Turbulent Flow Field in the Branching Channel
Adopting the depth-averaged k-? turbulence model and using the finite volume method and SIMPLE procedure, the turbulent flow field in the branching channel is numerically solved and verified...
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...
Use of Geographic Information System for Transportation Data Analysis
Origin-destination (O-D) survey data have been usually applied to identify travel characteristics for transportation planning activities. Travel forecasting models are also validated against...
Estimating Network Model Parameters from Mail Survey Data
Network models are generally based on a four-step modeling process; trip generation, trip distribution, modal split, and trip assignment. Microcomputer implementations of these steps have...
Building Separation Rules to Avoid Seismic Pounding
A method to estimate the required separation to preclude pounding between adjacent buildings is presented. It accounts for the effect of yielding on the vibration phase of adjacent buildings....
Data Base for Seismis Rick Assessment in Mexico City
We describe a model to estimate expected ground motions and expected damage, based on intensity damage relations derived for 14 classes of buildings representative of Mexico City construction....
System Factors in LRFD Format: A Multidimensional Judgment Call
A Load & Resistant Factor Design Specification for wood buildings is being completed. The Specification contains several revisions from the traditional 'repetitive member' factor...
Investigation in 3-D of Stress Distribution in a Circular Tunnel and Vertical Emplacement Holes Due to Thermal and Overburden Loading in Tuff
Thermal stress and displacement analysis using two 3-D finite element models, one having a course mesh and one having a highly detailed mesh are presented. Results are compared to those...
The Best of Both Worlds: Integrating Statistical and Deterministic Approaches to Area Remediation
We seek a complete framework for adaptive area characterization for purposes of remediation, incorporating both statistical and deterministic features. This hybrid methodology involves...
A Derived Flood Frequency Distribution for Ungaged Catchments
Flood frequency distribution for ungaged catchments are described in the article. The various parameters that effect the flood frequency distribution are describes. Influence of the climate...
Water Use Pattern of Residential and Commercial Customers
The availability of the Automatic Meter Reading (AMR) devices make it possible to read a large number of meters in a short period of time. Through the use of AMR, we monitored weekly water...
Return to search